A minimal handmade timber pendant with a clean square profile and warm recessed LED light. Designed for kitchen benches, dining tables and architectural interiors, each piece is made to order in your selected length, colour and lighting configuration.
From $500
Made to order — 4–6 week lead time
Product details
The Fold Pendant is made from timber and finished in paint with a protective clear coat. Its slim 35 x 70 mm body creates a clean architectural line, while the recessed LED produces a warm, softened glow without exposing the strip directly.
Each pendant is handmade, so small variations in finish, texture and detail are part of the piece.
Specifications
Product: Square Linear Pendant
Material: Timber
Finish: Painted timber or clear coat
Standard length: 1 m
Custom lengths: Available up to 2.4 m
Body profile: 35 mm x 70 mm
Cable spacing: 800 mm
Cable drop: Adjustable
Light source: Low-voltage LED strip
Voltage: 12–24V low-voltage system
Wattage: 24W/m
Colour temperature: 2700K–3000K warm white
Custom colour temperature: Available on request
Dimmable: Yes, depending on driver and control setup
LED access: Serviceable
Use: Indoor pendant lighting only
Wet areas: Not suitable for bathrooms or wet areas
Colour options
Terracotta
Ivory
Sage green
Baby pink
Custom colour by request
The product shown is Terracotta.
Please note that colours may vary slightly between screens, lighting conditions and handmade batches.
Lighting
This pendant is designed to provide warm ambient or task lighting, depending on the selected LED strip, length, mounting height and driver setup. It works well above kitchen benches, dining tables, workspaces and long surfaces where a soft linear light is needed.
Warm white options between 2700K and 3000K are available as standard. Custom colour temperatures may be available on request.
Installation
Supplied as a low-voltage pendant kit. The power supply/driver can be included as an optional extra depending on the installation requirements.
This product must be installed by a licensed electrician. Final electrical setup may vary depending on ceiling type, switching, dimming and driver location.
Custom orders
Custom lengths, colours and lighting configurations are available. For non-standard sizes, custom colours, dimming requirements or project orders, please enquire before ordering.
Lead time
Each pendant is made to order. Current lead time is approximately 4–6 weeks from order confirmation.
Shipping
Shipping is available Australia-wide and calculated at checkout. Local pickup is not currently available.
Returns and warranty
Standard returns apply. As this product is made to order, change-of-mind returns may be limited once production has started.
This product includes a workmanship warranty. This does not limit your rights under Australian Consumer Law.
A minimal handmade timber pendant with a clean square profile and warm recessed LED light. Designed for kitchen benches, dining tables and architectural interiors, each piece is made to order in your selected length, colour and lighting configuration.
From $500
Made to order — 4–6 week lead time
Product details
The Fold Pendant is made from timber and finished in paint with a protective clear coat. Its slim 35 x 70 mm body creates a clean architectural line, while the recessed LED produces a warm, softened glow without exposing the strip directly.
Each pendant is handmade, so small variations in finish, texture and detail are part of the piece.
Specifications
Product: Square Linear Pendant
Material: Timber
Finish: Painted timber or clear coat
Standard length: 1 m
Custom lengths: Available up to 2.4 m
Body profile: 35 mm x 70 mm
Cable spacing: 800 mm
Cable drop: Adjustable
Light source: Low-voltage LED strip
Voltage: 12–24V low-voltage system
Wattage: 24W/m
Colour temperature: 2700K–3000K warm white
Custom colour temperature: Available on request
Dimmable: Yes, depending on driver and control setup
LED access: Serviceable
Use: Indoor pendant lighting only
Wet areas: Not suitable for bathrooms or wet areas
Colour options
Terracotta
Ivory
Sage green
Baby pink
Custom colour by request
The product shown is Terracotta.
Please note that colours may vary slightly between screens, lighting conditions and handmade batches.
Lighting
This pendant is designed to provide warm ambient or task lighting, depending on the selected LED strip, length, mounting height and driver setup. It works well above kitchen benches, dining tables, workspaces and long surfaces where a soft linear light is needed.
Warm white options between 2700K and 3000K are available as standard. Custom colour temperatures may be available on request.
Installation
Supplied as a low-voltage pendant kit. The power supply/driver can be included as an optional extra depending on the installation requirements.
This product must be installed by a licensed electrician. Final electrical setup may vary depending on ceiling type, switching, dimming and driver location.
Custom orders
Custom lengths, colours and lighting configurations are available. For non-standard sizes, custom colours, dimming requirements or project orders, please enquire before ordering.
Lead time
Each pendant is made to order. Current lead time is approximately 4–6 weeks from order confirmation.
Shipping
Shipping is available Australia-wide and calculated at checkout. Local pickup is not currently available.
Returns and warranty
Standard returns apply. As this product is made to order, change-of-mind returns may be limited once production has started.
This product includes a workmanship warranty. This does not limit your rights under Australian Consumer Law.
